
Manufacturer part no. FNK0080
Listed by freenove at €10.56. Delivered to France, including shipping, VAT and any customs duty, it comes to about €30.67. Prices last checked on 2026-10-01.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €10.56 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.11 |
| Total delivered | €30.67 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 63 g |
Overview: This breakout board can help you wire and know the status of the GPIO. Just mount this board on your Raspberry Pi with a few screws and standoffs. We provide free technical support to help you with any questions and problems. Compatible Models: * Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero Note: NOT compatible with Raspberry Pi 500 / 400. Main Features: * Tutorial Can be downloaded (in English) or viewed online (original in English, can be translated into other languages by browsers). Including step-by-step guide to show how to use. The tutorial link can be found on the product box. (No paper tutorial.) http://freenove.com/fnk0080 * GPIO status LED LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level. * Independent LED The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected. * Terminal block and header Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch. * GPIO name The BCM numbering name of each pin is printed next to it. Package Includes: 1 x Breakout board 1 x Slotted screwdriver 1 x Cross screwdriver 5 x M2.5*12 standoff 10 x M2.5*4 screw