MÄDLERMÄDLER· Mechanics & transmission
Flange for timing belt pulley thickness 1mm Ø 32 x 28 x 21.5mm steel zinc plated
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €2.42. Delivered to France, including shipping, VAT and any customs duty, it comes to about €20.90. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €2.42 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.48 |
| Total delivered | €20.90 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 3 g |
| Inner diameter | 21.5 mm |
| Kink point diameter | 28 mm |
| Outer diameter | 32 mm |
| Thickness | 1 mm |
| Material | Steel |
| Surface | Zinc-plated |
Material: Steel, zinc-plated. Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time.