MÄDLERMÄDLER· Mechanics & transmission
Flange for timing belt pulley thickness 1mm Ø 66 x 61.5 x 52mm steel zinc plated
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €4.09. Delivered to France, including shipping, VAT and any customs duty, it comes to about €22.91. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €4.09 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.82 |
| Total delivered | €22.91 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 10 g |
| Dimensions | 5x52mm |
| Inner diameter | 52 mm |
| Kink point diameter | 61.5 mm |
| Outer diameter | 66 mm |
| Thickness | 1 mm |
| Material | Steel |
| Surface | Zinc-plated |
Material: Steel, zinc-plated. Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time.
Semantically close products available for less — check the specs match your need.