MÄDLERMÄDLER· Mechanics & transmission
Flange for timing belt pulley thickness 2.5mm Ø 154 x 146 x 122mm steel zinc plated
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €25.75. Delivered to France, including shipping, VAT and any customs duty, it comes to about €48.90. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €25.75 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.15 |
| Total delivered | €48.90 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 132 g |
| Dimensions | 154x146x122mm |
| Inner diameter | 122 mm |
| Kink point diameter | 146 mm |
| Outer diameter | 154 mm |
| Thickness | 2.5 mm |
| Material | Steel |
| Surface | Zinc-plated |
Material: Steel, zinc-plated. Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time.
Semantically close products available for less — check the specs match your need.