PololuPololu· Motor control
DRV8835 Dual Motor Driver Carrier
Manufacturer part no. 2135
$6.95≈ 6.11 €
Price summary
Listed by Pololu at €6.11. Delivered to France, including shipping, VAT and any customs duty, it comes to about €37.33. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 492 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €6.11 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €6.22 |
| Total delivered | €37.33 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $6.95 | |
| ≥ 5 | $6.39 | −8 % |
| ≥ 25 | $5.88 | −15 % |
| ≥ 100 | $5.41 | −22 % |
Datasheets & documents
- 📄 Dimension diagram of the DRV8835 Dual Motor Driver Carrier
- 📄 3D model of the DRV8835 Dual Motor Driver Carrier
- 📄 DRV8835 Dual Motor Driver Carrier drill guide
- 📄 Texas Instruments DRV8835 motor driver datasheet
- 📄 Texas Instruments DRV8835 product page
- 📄 Arduino library for the Pololu DRV8835 Dual Motor Driver Shield
- 📄 Paul's Wixel-based line following robot: Two Point Four
- 📄 Amanda's line following robot: Newbie
- 📄 Claire's line following robot: Oddish
- 📄 New product: Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi B+
- 📄 Two new motor driver shields for Arduino
Specifications (automatically extracted)
Electrical
| Frequency max. | 250 000 Hz |
| Voltage max. | 11 V |
| Voltage min. | 0 V |
Mechanical
| Weight | 0.5 g |
Other characteristics
| Continuous output current per channel | 1.2 A |
| Continuous paralleled output current | 2.4 A |
| Maximum logic voltage | 7 V |
| Minimum logic voltage | 2 V |
| Motor channels | 2 |
| Peak output current per channel | 1.5 A |
| Motor driver | DRV8835 |
| Other pcb markings | 0J3901 |
| Pcb dev codes | md18a |
Description
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
