
Manufacturer part no. 2898
Listed by Pololu at €10.10. Delivered to France, including shipping, VAT and any customs duty, it comes to about €42.12. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €10.10 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €7.02 |
| Total delivered | €42.12 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $11.49 | |
| ≥ 5 | $10.57 | −8 % |
| ≥ 25 | $9.73 | −15 % |
| ≥ 100 | $8.95 | −22 % |
| Voltage max. | 5.5 V |
| Voltage min. | 1.8 V |
| Weight | 0.5 g |
| Supply current | 1 mA |
| Interface | I²C/I3C, SPI |
| Measurement range | 26 kPa to 126 kPa |
| Other pcb markings | 0J14060 |
| Pcb dev codes | ps03a |
| Size | 0.4″ × 0.8″ × 0.1″ |
This carrier for ST’s LPS22DF digital barometer measures pressures from 260 mbar to 1260 mbar (26 kPa to 126 kPa) with absolute accuracy down to ±0.5 mbar (0.05 kPa) and typical RMS noise of 0.0034 mbar (0.34 Pa) in high-resolution mode. These pressures can easily be converted to altitudes. The board has a 3.3 V linear regulator and integrated level shifters that allow it to work over an input voltage range of 1.8 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards. The sensor offers I²C/I3C and SPI interfaces.
Semantically close products available for less — check the specs match your need.

