PololuPololu· Motor control
TB67S579FTG Stepper Motor Driver Compact Carrier (Soldered Header Pins)
Manufacturer part no. 5248
$10.95≈ 9.64 €
Manufacturer part no. 5248
Listed by Pololu at €9.64. Delivered to France, including shipping, VAT and any customs duty, it comes to about €41.57. Prices last checked on 2026-10-01.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €9.64 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €6.93 |
| Total delivered | €41.57 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $10.95 | |
| ≥ 5 | $10.07 | −8 % |
| ≥ 25 | $9.27 | −15 % |
| ≥ 100 | $8.53 | −22 % |
| Voltage max. | 34 V |
| Voltage min. | 4.5 V |
| Weight | 2.6 g |
| Continuous current per phase | 1.1 A |
| Maximum current per phase | 2 A |
| Maximum logic voltage | 5.5 V |
| Minimum logic voltage | 2 V |
| Current limit control | potentiometer |
| Header pins soldered | Yes |
| Microstep resolutions | full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32 |
| Motor driver | TB67S579FTG |
| Other pcb markings | 0J16259 |
| Pcb dev codes | md53a |
This version of our TB67S579FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S579FTG has a wide operating voltage range of 4.5 V to 34 V, and our carrier board can deliver approximately 1.1 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). Please see the TB67S579FTG Stepper Motor Driver Compact Carrier product page for more information about the driver.
Semantically close products available for less — check the specs match your need.
| Reverse voltage protection | No |
| Size | 0.6″ × 0.8″ |
