PololuPololu· Sensors
Pololu Distance Sensor with Pulse Width Output, 300cm Max, Side-Entry Connector
Manufacturer part no. 5493
$22.95≈ 20.21 €
Manufacturer part no. 5493
Listed by Pololu at €20.21. Delivered to France, including shipping, VAT and any customs duty, it comes to about €54.25. Prices last checked on 2026-10-01.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €20.21 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €9.04 |
| Total delivered | €54.25 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $22.95 | |
| ≥ 5 | $21.11 | −8 % |
| ≥ 25 | $19.42 | −15 % |
| ≥ 100 | $17.87 | −22 % |
| Voltage max. | 5.5 V |
| Voltage min. | 3 V |
| Weight | 0.5 g |
| Maximum range | 300 cm |
| Supply current | 30 mA |
| Update rate | 30 Hz |
| Connector | side-entry, 3-pin JST SH-type |
| Other pcb markings | 0J15469, 0J15601, or 0J15851 |
| Output type | digital pulse width |
| Pcb dev codes | irs17b |
| Resolution | 2 mm |
| Size | 0.9″ × 0.35″ × 0.22″ |
This small lidar-based distance sensor reports the distance of objects up to about 300 cm (120″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. It works over an input voltage range of 3.0 V to 5.5 V and features a side-entry 3-pin JST SH-style connector that is compatible with our 3-pin JST SH-style cables. Note: The maximum range of 300 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.
Semantically close products available for less — check the specs match your need.
