PololuPololu· Electronic components
Pololu Basic SPDT Relay Carrier for "Sugar Cube" Relays with JST SH-Style Top-Entry Connector
Manufacturer part no. 5664
Manufacturer part no. 5664
Listed by Pololu at €3.48. Delivered to France, including shipping, VAT and any customs duty, it comes to about €34.18. Prices last checked on 2026-10-01.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €3.48 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €5.70 |
| Total delivered | €34.18 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $3.95 | |
| ≥ 5 | $3.63 | −8 % |
| ≥ 25 | $3.34 | −15 % |
| ≥ 100 | $3.08 | −22 % |
| Voltage | 5 V |
| Weight | 2.5 g |
| Channels | 1 |
| Other pcb markings | 0J15858 |
| Pcb dev codes | rly01b |
| Size | 1″ × 1.15″ × 0.23″ |
| Style | carrier board with JST SH-style connector only (relays NOT included) |
This basic relay carrier board makes it easy to incorporate a single-pole, double-throw (SPDT) “sugar cube”-style power relay into your electronics project. An integrated MOSFET allows the relay to be controlled with a low-current digital input, and a pair of indicator LEDs show when the relay is activated. The three control pins are accessible via a top-entry JST SH-style connector that works with our selection of 3-pin JST SH-style cables, and the switch pins are available for use with 5mm-pitch terminal blocks or 0.2″-spaced pins. Note: Relay not included.
Semantically close products available for less — check the specs match your need.
