MÄDLERMÄDLER· Mechanics & transmission
One-piece clamp coupling MAS both sides bore 12mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
Manufacturer part no. 60099612
$81.30≈ 72.14 €
Price summary
Listed by MÄDLER at €72.14. Delivered to France, including shipping, VAT and any customs duty, it comes to about €104.57. Prices last checked on 2026-10-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 10 unitslead time 14 d
Estimated landed cost
| Item | €72.14 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €17.43 |
| Total delivered | €104.57 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 180 g |
Other characteristics
| Bore diameter | 12 mm |
| Max misalignment angle | 0 ° |
| Max misalignment axial | 0 mm |
| Max misalignment radial | 0 mm |
| Max outer diameter over screw head | 32.7 mm |
| Max speed | 4 U/min |
| Max torque | 32 Nm |
| Outer diameter | 29 mm |
| Temperature max. | 175 °C |
| Temperature min. | -40 °C |
| Tightening torque fastening screws | 2.5 Nm |
| Total length | 45 mm |
| Coupling type | Rigid one-piece stlye |
Description
Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 – A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
Similar products
MÄDLERIn stock
One-piece clamp coupling MAS both sides bore 12mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70
€85.81$96.70
View at seller ↗MÄDLERIn stock
One-piece clamp coupling MAS both sides bore 4mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
€94.95$107.00
View at seller ↗MÄDLERIn stock
One-piece clamp coupling MAS both sides bore 3mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
€102.96$116.02
View at seller ↗MÄDLERIn stock
One-piece clamp coupling MAS both sides bore 10mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
€72.17$81.33
View at seller ↗