Listed by GoTronic at €24.96. Delivered to France, including shipping, VAT and any customs duty, it comes to about €47.95. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €24.96 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €7.99 |
| Total delivered | €47.95 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Présentation et fonctionnalités : Module HAT pour carte Raspberry Pi à afficheur OLED blanc sur fond noir de 2,23" offrant une résolution de 32 x 128 pixels. Cet HAT dispose d'un facteur de forme similaire aux Raspberry Pi Zero. Programmation et communication : Un guide d'utilisation avec un exemple de code Python est disponible en fiche technique. Connectique : Ce module s'enfiche dans le port GPIO d'une carte Raspberry Pi et communique via le bus I2C. Un port Stemma QT situé sous l'écran permet la connexion de capteurs et modules compatibles. Caractéristiques : Alimentation : via le port GPIO Driver : SSD1305 Dimensions : 2,23" Résolution : 32 x 128 pixels Interface : I2C Compatibilité : B+, 2B, 3B, 3B+, 4B, Zero et Zero 2 Dimensions : 65 x 31 x 8 mm Référence : Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi 4567
Semantically close products available for less — check the specs match your need.