DFRobot SER0043 — SERVOMOTOR RC 4.8-6V vs DFRobot FIT0278 — HYBRID STEPPER MOTOR FOR 3D PRIN
DFRobot SER0043 — SERVOMOTOR RC 4.8-6V and DFRobot FIT0278 — HYBRID STEPPER MOTOR FOR 3D PRIN are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, DFRobot SER0043 — SERVOMOTOR RC 4.8-6V is €2.47 cheaper (€3.42).
| Criterion |  DFRobot SER0043 — SERVOMOTOR RC 4.8-6V |  DFRobot FIT0278 — HYBRID STEPPER MOTOR FOR 3D PRIN |
|---|---|---|
| Price | €3.42Best value | €5.89Least favorable value |
| Seller | DigiKey | DigiKey |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | — | 1.7 A |
| Voltage | 6 V | — |
| Angle de pas | — | 1.8 ° |
| Couple maintien oz in mnm | — | 48,6 / 343,19 |
| Diametre arbre | — | 0,197po (5,00mm) |
| Espacement des orifices de montage | — | 1,220 po (31,00mm) |
| Fonction | Servomoteur, RC (hobby) | — |
| Fonctionnalites | — | Axe rond |
| Longueur arbre et roulement | 0,126po (3,20mm) | 0,945po (24,00mm) |
| Pas par tour | — | 200 |
| Precision | — | ±5% |
| Resistance de bobine | — | 2 Ohms |
| Style de terminaison | Fil conducteur avec connecteur | Connecteur |
| Taille de chassis nema | — | 17 |
| Taille dimension | Rectangulaire - 0,480po x 1,268po (12,20mm x 32,20mm) | Carré - 1,654po x 1,654po (42,00mm x 42,00mm) |
| Temperature de fonctionnement | -30°C ~ 60°C | -20°C ~ 50°C |
| Tension nominale | 4,8 ~ 6 VDC | 3,4V CC |
| Type | Moteur CC | Hybride |
| Type de bobine | — | Bipolaire |
| Type de moteur | Rotation continue | — |
| Moisture sensitivity (MSL) | 1 (illimité) | 1 (illimité) |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.