PololuPololu· Motor control
Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Manufacturer part no. 3132
$44.95≈ 39.51 €
Price summary
Listed by Pololu at €39.51. Delivered to France, including shipping, VAT and any customs duty, it comes to about €77.41. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 122 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €39.51 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €12.90 |
| Total delivered | €77.41 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $44.95 | |
| ≥ 5 | $41.35 | −8 % |
| ≥ 25 | $38.05 | −15 % |
| ≥ 100 | $35.00 | −22 % |
Datasheets & documents
- 📄 Tic Stepper Motor Controller User’s Guide
- 📄 Tic Software and Drivers for Windows
- 📄 Tic Software for Linux (x86)
- 📄 Tic Software for Linux (Raspberry Pi)
- 📄 Tic Software for macOS
- 📄 Dimension diagrams of the Tic USB Multi-Interface Stepper Motor Controllers
- 📄 3D models of the Tic USB Multi-Interface Stepper Motor Controllers
- 📄 Drill guides for the Tic USB Multi-Interface Stepper Motor Controllers
- 📄 MPS MP6500 stepper motor driver datasheet
- 📄 TB67S249FTG datasheet
- 📄 UM10204 I²C-bus specification and user manual
- 📄 Video: Getting Started with the Tic Stepper Motor Controllers
Price history
2 price/stock records since 8/4/2026
Specifications (automatically extracted)
Electrical
| Voltage max. | 10.8 V |
| Voltage min. | 2.5 V |
Mechanical
| Weight | 8.4 g |
Other characteristics
| Continuous current per phase | 1.5 A |
| Maximum current per phase | 2 A |
| Maximum step rate | 50 000 PPS |
| Connectors soldered | Yes |
| Control interface | USB; non-inverted TTL serial; I²C;<br/> RC servo pulses; analog voltage; quadrature encoder |
| Microstep resolutions | full, 1/2, 1/4, 1/8, 1/16, and 1/32 |
| Model | Tic T834 |
| Motor driver | DRV8834 |
| Other pcb markings | 0J10607 |
| Pcb dev codes | tic02a |
Description
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and ships with soldered header pins and terminal blocks. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling).
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
Similar products
PololuIn stock
Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
€39.51$44.95
View at seller ↗
PololuIn stock
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
€30.72$34.95
View at seller ↗
