PololuPololu· Motor control
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Manufacturer part no. 3134
$34.95≈ 30.72 €
Price summary
Listed by Pololu at €30.72. Delivered to France, including shipping, VAT and any customs duty, it comes to about €66.86. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 146 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €30.72 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €11.14 |
| Total delivered | €66.86 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $34.95 | |
| ≥ 5 | $32.15 | −8 % |
| ≥ 25 | $29.58 | −15 % |
| ≥ 100 | $27.22 | −22 % |
Datasheets & documents
- 📄 Tic Stepper Motor Controller User’s Guide
- 📄 Tic Software and Drivers for Windows
- 📄 Tic Software for Linux (x86)
- 📄 Tic Software for Linux (Raspberry Pi)
- 📄 Tic Software for macOS
- 📄 Dimension diagrams of the Tic USB Multi-Interface Stepper Motor Controllers
- 📄 3D models of the Tic USB Multi-Interface Stepper Motor Controllers
- 📄 Drill guides for the Tic USB Multi-Interface Stepper Motor Controllers
- 📄 MPS MP6500 stepper motor driver datasheet
- 📄 TB67S249FTG datasheet
- 📄 UM10204 I²C-bus specification and user manual
- 📄 Video: Getting Started with the Tic Stepper Motor Controllers
Specifications (automatically extracted)
Electrical
| Voltage max. | 35 V |
| Voltage min. | 4.5 V |
Mechanical
| Weight | 8.2 g |
Other characteristics
| Continuous current per phase | 1.5 A |
| Maximum current per phase | 2.5 A |
| Maximum step rate | 50 000 PPS |
| Connectors soldered | Yes |
| Control interface | USB; non-inverted TTL serial; I²C;<br/> RC servo pulses; analog voltage; quadrature encoder |
| Microstep resolutions | full, 1/2, 1/4, and 1/8 |
| Model | Tic T500 |
| Motor driver | MP6500 |
| Other pcb markings | 0J11038, 0J11910 |
| Pcb dev codes | tic03a, tic03b |
Description
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and ships with soldered header pins and terminal blocks. It can operate from 4.5 V to 35 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
Similar products
PololuIn stock
Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
€39.51$44.95
View at seller ↗
PololuIn stock
Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
€39.51$44.95
View at seller ↗
